Відео

OMG stfu and get to the point

I’m getting a leak, but it’s gritty like it’s got salt in it and it sprays everywhere! I’m not finding a leak dripping though any suggestions?

Hello Gary, new subscriber here, I have the harmsco industrial filter hif 7 that uses - 801 filters, what carbon filter do you recommend for this system

I think after sanitizing you should not flush with tap water without the filters. Doing this will contaminate the RO housing. I think it makes more sense to put the filters in place before flushing the system. Mycobacterium is in tap water and can colonize in the carbon filters.

What do you think about hose water in Los Angeles, what what we drunk and I’m ok 🤪

This is great ! I will look into sending you a water sample. Does your water test for pesticides and/or radiation?

You're the man!! So grateful for you!!

This is no more than product placement for coca-cola/ pepsi co.

My brine stage is set to 60 minutes. During this time I see the brine solution goes down but the brine is siphoned off sooner than 60 minutes so I kept adding water with the hose. So does there have to be enough water in brine tank to run for 60 minutes? That seems like a lot of water especially if brine tank is full of salt (less water).

What does a typical system like this cost in the US?

I DRINK BOTTLED WATER ,I ALSO HAVE A 7 LITRE FILTER THAT I USE TO FILTER TAP WATER.

I cannot get the plastic wrench on my water housing filter for the RV Caravan it will not go up there is no room and my old one is missing so the new one is tight and i cannot get it off so will have to go and get an oil wrench will see how it goes

When you do the manual regeneration cycle how do you have time to clean the tank if the. Softener immediately goes into the next chcle

Well I followed your instructions and it worked PERFECTLY!. I was trying to get this thing off for days and I followed your simple steps and it came right off. Very simple. Great Video and look forward to more. Thanks

Another great video Gary. Thank you. I find there is always salt in my brine tank. How do I know when to add more? Should the salt always be at a specific level? If you have a video on this, feel free to point me in that direction. Thanks again!

Great explanation Gary. I feel confident in how this rather complicated looking system works. Thanks so much.

Thanks Gary. Great explanation. Not sure if you are still responding to questions, but if the control display gets unplugged (I have the Fusion 2 display), does this reset or cancell all the settings originally set up by the installer? Needless to say, I unplugged the display. 😒

I shocked my well, my water softener system and my RO system. I followed the procedure here for the RO system. Afterwards I took samples and sent them for testing and everything came back clean except the RO system which came back overgrown. I did remove all the filters and membrane since the system needed it but now that it is still contaminated, I don't really want to go through the same process over and eat the cost of more new components when it won't necessarily correct the problem. I believe the new RO membrane was the problem and if you can't sterilize everything I don't see what use RO is. It's too much of a pain, too expensive and the most likely part of your water system to cause you to be drinking unsafe water. Stay simple!

Hey boss so I cleaned out my water tank filled up the tank and plugged back the filter but now there’s no pressure my filter is making noise but not working any tips ? Please 🙏

Thank you!

What about Ozarka?

Do you have any machine for agriculture purpose.

Can I just get the names of a a few brands that have ZERO fluoride and ZERO chlorine ? And by zero...I mean ZERO !! Thanks

I bought the rebuild kit and installed it. I now have water coming out of the air suction line. Not a lot of water but some when it first goes into the backwash cycle.

Thanks for sharing this very useful information .

"Socially Equitable" what the fuck is that?

Gary, I successfully empied my tank and hooked it back up again and it is running fine. Thankyou for the good instructions. But, while I was emptying the tank the water stopped coming out about half way empty. I had to insert a stick into the air valve to empty the rest of the water as well as alot of the air. The water came out brownish. Is that because it has rusted inside? Do I need to replace the tank? Now that it is up and running there is no sign of discoloration or off taste. What do you think?

Hi Gary how often should a carbon filter that's before the water softener regenerate thank you

Mine is won’t turn on, I took my board to my buddys house and turns on right away

Hi Gary, my water had been fluctuating (pressure) for a couple of days and yesterday we loss water completely, called our the plumber he closed out the valves of the mineral tank and we had water again, his diagnosis was that my mineral tank was bad and it needed to be replaced for $2,200. I asked him could the mineral tank be clogged and/or in need of re bedding? His answer was terse No! Just wondering your thoughts?

Two things: 1. the recommended sodium intake per day by gov't and previous health standards has been proven to be HALF what we actually need. So you can pretty much take all your sodium content and toss it. 2. Just eat red meat and you will get far far far more nutrients and electrolytes than eating any fruits or vegetables. Few people have true knowledge to realize that vegetable and fruit nutrients are hardly bioavailable for humans, so eating red meat for your nutrients is far more likely to give you the nutrients you need...and no, cholosterol does not cause heart disease...cause that was everyone's next comment.

Hi Gary, appreciate your videos. Im trying to troubleshoot my at least 15 year old fleck 5600 econominder thats not really softening the water very well. I replaced the resin last year and that didn't seem to help. I'm wondering, could the (never been replaced) brine valve and or piston and seals somehow be the culprit? I'm wondering if either of those assemblies could possibly be leaking untreated water into the resin tank. Id br happy to provide pictures of the piston though a dropbox link if you'd like, it has some substantial pitting in places. Kinda stumped down here in Florida my friend, any help would be greatly appreciated. Also, the Injector nozzle and injector throat are clear of any obstructions. water hardness is 14, resin tank is clack 8X44

How to fix error e2 on clack 3 button??

great and helpful video. I would recomend to change your audio type to mono if the sound is only coming from one ear.

Is that only for your filters? Is it proprietary or can i get them at lowes?

How often does a water softener typically regenerate? We would be a lower useage household. How low does the reservoir usually go before it regenerates?

You indicated in this video that a water softener should regenerate at least once every 14 days (Days Override setting). You said this would mitigate the clumping of the resin beads and "fluff up" the media. I have never heard of this before. I am a single person with a 32,000 grain capacity softener. It is set on AUTO Regen so it determines when to regen based on water hardness (23 grains) and softener capacity and gallons used (metered). This has been about every 17 days for me. When I configured the Days Override setting to 14 days my gallons per regen decreased accordingly. Now it will use more water and salt. Question: Is it really necessary to configure the Days Override setting to 14 days?

Oh cans have a plastic linings for anything that is canned that could be acidic.

Icelandic water is shipped via Icelandic Air’s freight planes and if allowing on passenger jets, then to a local distributor of soda/beer depending on the country. Did you know soda is manufactured and distributed by a lot of beer companies in the EU? Why air shipping, no port big enough for container shipping. Other large item shipping comes by Ferry from Denmark, Norway and UK. Also being part of the EU it is a plant based bottle. Yeah I am a fan of bottle water filtered by volcanic rock. My drinking water as a kid was from volcanic rock, and still is but the chlorine since discovery and illness from cryptosporidium ruined it for me. Otherwise very informative video. However I use a water filter in my hometown.

Icelandic spring water is my favorite but to ask you is it really healthy ?

the filter box still plastic？

Is Ecowater ER385 a good RO system and is it worth its high price

What if my cottage needs to be winterized ?

Is there anyway to set the program to backwash the Iron filter after amount of usage instead of by day, like the water softener filter does?. I travel a lot and it doesn't need to backwash every day or few days if I'm gone for a week or two. Right now I have to unplug the system when I'm away.

We just bought our first house today, and the previous owner installed a water softener, and it makes a lot of noise, regen every day too... What should I start with to try and do a good maintenance, knowing that the previous owner wasn't too commited to maintenance?

Hi Gary I have a Reynolds Water Conditioner and my float in the brine tank does not look like yours. I actually think maybe parts might be missing in mine. I’m going to add a pic

Great video! How do you handle cottages with long periods of no use? 1 to 4 months of no use. Stagnant water? Bacteria formation in filters?

Did not see you add gravel

I have two tanks I need to replace the resin water filter head. It is a clack but I don’t know the model number. It not for the brine tank. Does not have a brine intake hose. It is about 10 years old.

Should I put the filtration before or after the pressure tank?